Designing and Implementing Microsoft Azure Networking Solutions Practice Test
Microsoft AZ-700 Exam Dumps Questions
Prepare and Pass Your AZ-700 Exam with Confidence. AllExamTopics offers updated exam questions and answers for Designing and Implementing Microsoft Azure Networking Solutions, along with easy-to-follow study material based on real exam questions and scenarios. Practice smarter with high-quality practice questions to improve accuracy, reduce exam stress, and increase your chances to pass on your first attempt.
312 Questions & Answers with Explanation
Update Date : Mar 31, 2026
PDF + Test Engine
$159 $318
Test Engine
$129 $258
PDF Only
$99 $198
Success GalleryReal results from real candidates who achieved their certification goals.
AZ-700 - Designing and Implementing Microsoft Azure Networking Solutions Practice Exam Material | AllExamTopics
Get fully prepared for the AZ-700 – Designing and Implementing Microsoft Azure Networking Solutions certification exam with AllExamTopics’ trusted passing material. We provide AZ-700 real exam questions answers, updated study material, and powerful online practice material to help you pass your exam on the first attempt.
Our Designing and Implementing Microsoft Azure Networking Solutions exam study material is designed for both beginners and experienced professionals who want a reliable, exam-focused preparation solution with a 100% passing and money-back guarantee.
Why Choose AllExamTopics for AZ-700 Exam Preparation?
At AllExamTopics, we focus on real results, not just theory. Our AZ-700 practice material is built using real exam patterns and continuously updated based on the latest exam changes.
100% Passing Guarantee
Money-Back Guarantee
Real Exam Questions Answers
Updated Passing Material
Free Practice Questions Answers
Online Practice Material
Instant Access After Purchase
We help you prepare smarter, not harder.
What’s Included in Our AZ-700 Exam Questions PDF?
Our AZ-700 practice exam material covers all official exam objectives and provides complete preparation in one place.
1. AZ-700 Real Exam Questions Answers
Based on recent and actual exam scenarios
Covers all important and frequently asked questions
Helps you understand real exam patterns
2. Practice Material for Self-Assessment
High-quality practice questions answers
Helps identify weak areas before the real exam
Improves accuracy and speed
3. Online Practice Material
Real exam-like interface
Accessible on desktop, tablet and mobile
Practice anytime, anywhere
4. Free AZ-700 Practice Questions Answers
Try before you buy
Evaluate our AZ-700 dumps quality
Understand the exam format
5. Comprehensive Study Material
Clear explanations for each topic
Easy-to-understand answers
Designed to strengthen both concepts and confidence
Real AZ-700 Exam Questions You Can Trust
Study only what matters. Our AZ-700 Practice exam questions are created by industry experts and verified by recent exam passers, so you focus on real exam patterns, not guesswork. Prepare smarter, reduce stress, and boost your chances of passing on the first attempt.
Take Your Designing and Implementing Microsoft Azure Networking Solutions to an Expert Level
Thinking about advancing your wireless career? The AZ-700 certification is ideal for beginners, working IT professionals, and experienced experts looking to upgrade skills. Our study material is designed to support all experience levels with clear, practical preparation.
Everything You Need to Pass, in One Place
Get instant access to complete AZ-700 exam preparation. From trusted passing material and clear study material to realistic practice material, online practice material, and real exam questions answers, everything is built to help you pass with confidence.
Free Microsoft AZ-700 Questions & Answers
Try free Microsoft Designing and Implementing Microsoft Azure Networking Solutions Practice exam questions before buy.
Question # 1
Task 4 You need to ensure that connections to the storage34280945 storage account can be made by using an IP address in the 10.1.1.0/24 range and the name storage34280945.pnvatelinlcblob.core.windows.net.
Answer: See the Explanation below for step by step instructions. Explanation: Here are the steps and explanations for ensuring that connections to the storage34280945 storage account can be made by using an IP address in the 10.1.1.0/24 range and the name stor-age34280945.pnvatelinlcblob.core.windows.net: To allow access from a specific IP address range, you need to configure the Azure Storage firewall and virtual network settings for your storage account. You can do this in the Azure portal by selecting your storage account and then selecting Networking under Settings1. On the Networking page, select Firewalls and virtual networks, and then select Selected networks under Allow access from1. This will block all access to your storage account except from the networks or resources that you specify. Under Firewall, select Add rule, and then enter 10.1.1.0/24 as the IP address or range. You can also enter an optional rule name and description1. This will allow access from any IP address in the 10.1.1.0/24 range. Select Save to apply your changes1. To map a custom domain name to your storage account, you need to create a CNAME record with your domain provider that points to your storage account endpoint2. A CNAME record is a type of DNS record that maps a source domain name to a destination domain name. Sign in to your domain registrar’s website, and then go to the page for managing DNS settings2. Create a CNAME record with the following information2: Save your changes and wait for the DNS propagation to take effect2. To register the custom domain name with Azure, you need to go back to the Azure portal and select your storage account. Then select Custom domain under Blob service2. On the Custom domain page, enter storage34280945.pnvatelinlcblob.core.windows.net as the custom domain name and select Save2.
Question # 2
Task 6 You need to ensure that all hosts deployed to subnet3-2 connect to the internet by using the same static public IP address. The solution must minimize administrative effort when adding hosts to the subnet.
Answer: See the Explanation below for step by step instructions. Explanation: Here are the steps and explanations for ensuring that all hosts deployed to subnet3-2 connect to the internet by using the same static public IP address: To use the same static public IP address for multiple hosts, you need to create a NAT gateway and associate it with subnet3-2. A NAT gateway is a resource that performs network address translation (NAT) for outbound traffic from a subnet1. It allows you to use a single public IP address for multiple private IP addresses2. To create a NAT gateway, you need to go to the Azure portal and select Create a resource. Search for NAT gateway, select NAT gateway, then select Create3. On the Create a NAT gateway page, enter or select the following information and accept the defaults for the remaining settings: Select Review + create and then select Create to create your NAT gateway3. To associate the NAT gateway with subnet3-2, you need to go to the Virtual networks service in the Azure portal and select your virtual network. On the Virtual network page, select Subnets under Settings, and then select subnet3-2 from the list. On the Edit subnet page, under NAT gateway, select your NAT gateway from the drop-down list. Then select Save.
Question # 3
Task 2 You need to ensure that you can deploy Azure virtual machines to the France Central Azure region. The solution must ensure that virtual machines in the France Central region are in a network segment that has an IP address range of 10.5.1.0/24.
Answer: See the Explanation below for step by step instructions. Explanation: To deploy Azure virtual machines to the France Central region and ensure they are in a network segment with an IP address range of 10.5.1.0/24, follow these steps: Step-by-Step Solution Step 1: Create a Virtual Network in France Central Navigate to the Azure Portal. Search for “Virtual networks” in the search bar and select it. Click on “Create”. Enter the following details: Click on “Next: IP Addresses”. Step 2: Configure the Address Space and Subnet In the IP Addresses tab, enter the address space as 10.5.1.0/24. Click on “Add subnet”. Enter the following details: Click on “Add”. Click on “Review + create” and then “Create”. Step 3: Deploy Virtual Machines to the Virtual Network Navigate to the Azure Portal. Search for “Virtual machines” in the search bar and select it. Click on “Create” and then “Azure virtual machine”. Enter the following details: Click on “Next: Disks”, configure the disks as needed, and then click on “Next: Networking”. In the Networking tab, select the virtual network (VNet-FranceCentral) and subnet (Subnet-1) created earlier. Complete the remaining configuration steps and click on “Review + create” and then “Create”. Explanation Virtual Network: A virtual network in Azure allows you to create a logically isolated network that can host your Azure resources. Address Space: The address space 10.5.1.0/24 ensures that the VMs are in a specific network segment. Subnet: Subnets allow you to segment the virtual network into smaller, manageable sections. Region: Deploying the virtual network and VMs in the France Central region ensures that the resources are physically located in that region By following these steps, you can ensure that your Azure virtual machines in the France
Central region are deployed within the specified IP address range of 10.5.1.0/24.
Question # 4
Task 11 You are preparing to connect your on-premises network to VNET4 by using a Site-to-Site VPN. The on-premises endpoint of the VPN will be created on a firewall named Firewall 1. The on-premises network has the following configurations: • Internal address range: 10.10.0.0/16. • Firewall 1 internal IP address: 10.10.1.1. • Firewall1 public IP address: 131.107.50.60. BGP is NOT used. You need to create the object that will provide the IP addressing configuration of the onpremises network to the Site-to-Site VPN. You do NOT need to create a virtual network gateway to complete this task.
Answer: See the Explanation below for step by step instructions. Explanation: Here are the steps and explanations for creating the object that will provide the IP addressing configuration of the on-premises network to the Site-to-Site VPN: The object that you need to create is called a local network gateway. A local network gateway represents your on-premises network and VPN device in Azure. It contains the public IP address of your VPN device and the address prefixes of your on-premises network that you want to connect to the Azure virtual network1. To create a local network gateway, you need to go to the Azure portal and select Create a resource. Search for local network gateway, select Local network gateway, then select Create2. On the Create local network gateway page, enter or select the following information and accept the defaults for the remaining settings: Select Review + create and then select Create to create your local network gateway2.
Question # 5
Task 3 You plan to implement an Azure application gateway in the East US Azure region. The application gateway will have Web Application Firewall (WAF) enabled. You need to create a policy that can be linked to the planned application gateway. The policy must block connections from IP addresses in the 131.107.150.0/24 range. You do NOT need to provision the application gateway to complete this task.
Answer: See the Explanation below for step by step instructions. Explanation: Here are the steps and explanations for creating a policy that can be linked to the planned application gateway and block connections from IP addresses in the 131.107.150.0/24 range: To create a policy, you need to go to the Azure portal and select Create a resource. Search for WAF, select Web Application Firewall, then select Create1. On the Create a WAF policy page, Basics tab, enter or select the following information and accept the defaults for the remaining settings: On the Custom rules tab, select Add a rule to create a custom rule that blocks connections from IP addresses in the 131.107.150.0/24 range2. Enter or select the following information for the custom rule: On the Review + create tab, review your settings and select Create to create your WAF policy1. To link your policy to the planned application gateway, you need to go to the Application Gateway service in the Azure portal and select your application gateway3. On the Web application firewall tab, select your WAF policy from the drop-down list and select Save
Discussion
Be part of the discussion — drop your comment, reply to others, and share your experience.
